Repairing the Gateway FDP1975W with the ILPI-021 power supply board

December 14, 2011 by · 1 Comment
Filed under: Gateway, Monitor Repair 

Gateway corp. produced the FDP1975W monitor with 2 different power supply boards, this guide is for the units with the ILPI-021 power supply board also known as a 79070140 board. If your monitor has no power, a flashing power light, is very dim or takes a long time to display a picture then this guide should help you out. The power supply boards fail because of the parts called capacitors that overheat and short out. Read more

Repairing the Hanns-G HN199D 19″ LCD monitor

August 8, 2011 by · Leave a Comment
Filed under: Hanns-G, Monitor Repair 

In this guide we will show you how to repair your Hanns-G HN199D 19″ LCD monitor. If you monitor is having power issues such as no power, just a flashing power light or if it takes a long time to display a picture then this will help you get it back working again. The Hanns-G HN199D uses the XAD819AR EA02819X power supply board. Read more

Repairing the Samsung Syncmaster 710T

April 18, 2011 by · Leave a Comment
Filed under: Monitor Repair, Samsung 

We have had several of these Samsung Syncmaster 710T units in our shop recently for repairs. This model uses the BN44-00113A power supply board. This power supply board is also used in the Samsung Syncmaster 711N, 911N, 920N, 930B and 720N models. The one we will be repairing here takes a long time to show a picture, but this power supply issue can also cause no power at all or just a blinking power light and no display.  Read more

Reparing a Samsung 2493HM 24″ LCD monitor

April 11, 2011 by · 18 Comments
Filed under: Monitor Repair, Samsung 

This repair guide will show you how to open and repair a Samsung 2493HM 24″ monitor. The monitor we have here has no power but the power supply can cause several type of problems such as slow to show picture, a flashing or flickering display, blinking power light and no display, or no power at all. The Samsung 2493HM uses the BN44-00195A power supply board made by Dong Yang. Read more

Repairing the Westinghouse LCM-19V5

March 20, 2011 by · Leave a Comment
Filed under: Monitor Repair, Westinghouse 

We had a Westinghouse LCM-19V5 come into the shop over the weekend with a failing power supply. The unit uses the DAC-19M001 power supply board. The monitor just had a blinking power light and no display. A failure of the power supply on this model can also be indicated by a monitor that is slow to turn on or takes a minute or two to show a picture. Read more

Visco VSC-37V1 – no picture, let’s repair it.

January 16, 2011 by · Leave a Comment
Filed under: Monitor Repair, Other Brands, Polaroid 

In this repair guide article we will be repairing a Visco VSC-37V1 37″ LCD monitor that has a power light but no picture, but it could also have no power or a blinking power light caused by the same issue. This model uses the MLT070AX power supply that is also used in the following Polaroid models: 3700, FLM-323B , FLM-373B , FLM-3732 and in some Element TVs such as the FLX3711B Read more

« Previous PageNext Page »

Content Protected Using Blog Protector By: PcDrome.