HG281D Help

[onyxius]

Ok, so I ordered the capacitors and am looking at the image on the website since I can't find any guide, even though the sticker on my baggy that came with it says to go to the website for the guide.

Anyway my board doesn't look like the one you guys have. I need to verify which capacitors I need to swap out, out of the 10 that I was sent.

I need this fairly fast as this is my main monitor for my computer.

Thanks
P/N:71-T9811200G002 PILBF092200158

[onyxius]

i have been looking around at other sites and other people are selling capacitors in the amount of 12 to 14. My board has 14 of them. Did i perhaps get shipped the wrong amount?

Still no guide found either

[CCL_Tech]

Hello,

Your board is normally used in the I-inc version not the Hanns-g monitor but they are both made by the same company and sometimes they swap boards around. That's one of the bad things with the Hanns-G monitors, you really need to open them and check which board they used in the monitor because they are non standard. The board model number you have is FSP217-4F02 The capacitors you need for your board are as follows:

Qty 2 1000uf 35v
Qty 2 1000uf 25v
Qty 2 680uf 25v
Qty 1 220uf 25v
Qty 1 220uf 35v
Qty 1 100uf 50v
Qty 1 33uf 50v
Qty 1 10uf 50v

We will be glad to swap out your kit.

[onyxius]

so you need me to send you back the pack that I have so you can send me the right pack?

Also, what about a guide to which ones I need to replace?

[onyxius]

the wife is going to send them back today. Do i need to call or do anything else?

[CCL_Tech]

Nothing else needs to be done, We have the correct kit going out to you today. You will be replacing all of the caps on the board except the very large 450v one. I will post your picture with the parts circled.

[onyxius]

Nothing else needs to be done, We have the correct kit going out to you today. You will be replacing all of the caps on the board except the very large 450v one. I will post your picture with the parts circled.

awesome thank you, the wife was running behind and forgot the kit, ill send it out tomorrow morning. Thank you very much for the help.

BTW i ordered another kit a few weeks ago for my wifes monitor, and it worked great. thanks guys

[onyxius]

Nothing else needs to be done, We have the correct kit going out to you today. You will be replacing all of the caps on the board except the very large 450v one. I will post your picture with the parts circled.

have you had a chance to get those pics?

[ddan]

you might just as well forget about these people getting back to you they have expended all the energy they have by replying probably cant figure out how to use a camera to take the pictures they said they would let alone how to post them

[onyxius]

going on 2 weeks and still haven't gotten my capacitors. I sent mine after they said they would send mine but i'm betting they got mine already.

What's going on guys??????